F125 livery editor tips

Learn about F125 livery editor tips

Updated October 12, 2025

If you’ve opened the livery editor and felt overwhelmed, you’re not alone. F125 livery editor tips can seem confusing because F1 25 uses template-based paint schemes, mode-specific garages, and lighting that makes colors look different on track. This guide will show you exactly how to design, save, and apply clean liveries that look great in replays and online.

Quick Answer

Pick the right mode first (Multiplayer Car vs My Team), choose a base template, then set a simple 3-color palette (60/30/10 rule). Use matte for large areas to reduce glare, gloss for accents, and test your livery on a bright track and a night track. Save presets and duplicate for each game mode.

Why F125 livery editor tips Feels So Hard at First

You’re designing inside templates with fixed color slots, not a fully free paint booth.
Each game mode stores liveries separately, so changes in one mode don’t carry to another.
Track lighting and HDR make colors shift between the showroom and on-track cameras.

By the end of this guide, you’ll know exactly which menus to use, how to build a clean, readable design, and how to avoid the most common pitfalls.

What F125 livery editor tips Means in F1 25

It’s a template-based editor: you pick a base design and customize color slots and finishes.
Car livery customization is available for the Multiplayer Car and My Team. If you’re driving for a real F1 team in Career, you cannot repaint that team’s official car.
Logos and numbers use pre-defined positions. You can’t freely move sponsor decals on the car; My Team sponsors auto-place in set locations.
No custom image imports (as of the latest major patch). You can create a team badge/emblem with in-game shapes and colors.

Before You Start (Prerequisites)

Hardware: Any controller or wheel works; the editor doesn’t require special hardware.
Game modes:
- Multiplayer Car (F1 World/online): your custom car shows in modes that use the multiplayer chassis.
- My Team: full custom team car, badge, number, sponsors.
- Career (driver for real team): car livery is locked to the team; you can still edit helmet/suit.
Menus you’ll use:
- From the main hub: Customization > Car Liveries (Multiplayer Car)
- From My Team HQ: Customization > Team > Car Livery, Badge, Team Colors
- Driver > Helmet/Suit/Gloves to match your brand

Step-by-Step: How to Fix / Improve F125 livery editor tips

Choose the correct mode

From the main hub, open Customization.
For online/F1 World, select Multiplayer Car.
For your My Team save, open My Team > Customization > Car Livery.
Success: You see the car model for that mode, with a list of templates on the left.

Pick a base template

Browse Base Liveries and choose one with stripe shapes that match your vision (clean curves read best on broadcast cams).
Success: A template is highlighted and previewed on the 3D car.

Set a simple color palette (60/30/10 rule)

Use three slots if available:
- Primary (60%): neutral or dark base (charcoal, navy).
- Secondary (30%): your brand color (red, cyan, lime, etc.).
- Accent (10%): high-contrast (white or near-white for readability).
Aim for contrast so your number and sponsors pop.
Success: The car looks balanced—one dominant color, one support, one highlight.

Adjust finishes/materials

If the template supports finishes, set:
- Matte for large base areas (cuts glare and banding).
- Gloss or metallic on accent lines for pop.
Avoid all-gloss everything—it can blow out under floodlights.
Success: Under showroom lights, you see subtle difference between panels without harsh reflections.

Set number, badge, and sponsors

Number: Choose a readable color (usually white) and ensure it contrasts the body panel behind it.
Badge/Emblem: Open Badge Editor, build a simple shape stack, match your palette, and test legibility at small size.
Sponsors (My Team): Select sponsor set; the game auto-places logos on the car. Pick a primary sponsor with a logo that contrasts your base color.
Success: Numbers and logos are readable in the 3/4 front TV camera.

Harmonize driver gear

Go to Driver > Helmet/Suit/Gloves and use the same 3-color scheme. Keep gloves high-contrast for cockpit cameras.
Success: Your brand looks consistent across car and gear.

Save and create variants

Choose Save/Save as Preset.
Duplicate a “Night/Wet” variant and bump brightness slightly (5–10%) to compensate for darker scenes.
Create separate presets for Multiplayer Car and My Team—they’re stored per mode.
Success: You have at least two named presets per mode (Day and Night/Wet).

Test on track

Load Time Trial or a quick race with the correct car type:
- Multiplayer tests: any event that uses the Multiplayer Car.
- My Team tests: start a practice session in your My Team save.
Check in replay with TV Pod and trackside cams at a bright (Bahrain/Spain) and a night track (Jeddah/Singapore).
Success: Colors stay consistent; logos and number are readable at speed.

Common Mistakes and Myths About F125 livery editor tips

“My custom livery should show in all online races.”
- Not always. Some playlists use official F1 cars—your custom Multiplayer Car won’t appear there.
“I can move sponsor logos anywhere.”
- You can’t. Car decal locations are fixed; helmets/suits offer more freedom.
“I edited my livery but it didn’t change in My Team.”
- Each mode saves separately. Make a preset for Multiplayer and another for My Team.
Overcomplicating the palette
- Four or more loud colors gets messy in motion. Stick to 3 and use contrast.
All-gloss finishes
- Looks flashy in the showroom but can blow out under midday sun or stadium lights.

Troubleshooting and “What If It Still Feels Wrong?”

My livery isn’t saving
- Likely cause: Exiting without confirming. Action: After editing, choose Save/Apply, then confirm the overwrite or create a new preset.
Colors look different on track vs showroom
- Cause: Lighting/HDR. Actions: Test at one bright track (e.g., Bahrain/Spain) and one night track (e.g., Jeddah/Singapore). If using HDR, reduce saturation slightly and raise brightness a notch for night variants.
Sponsors aren’t visible or are hard to read
- Cause: Low contrast or conflicting base color. Actions: Switch base to a darker shade, make numbers/logos white, and avoid placing light logos on light panels. Choose sponsors with logos that pop against your base.
My custom car doesn’t appear online
- Cause: The playlist uses official F1 cars. Actions: Join modes/races that use the Multiplayer Car. Check the event description.
I can’t import a custom logo
- Cause: Feature not supported. Actions: Use the in-game Badge Editor. Keep shapes bold and simple for small sizes.
The editor options differ from a YouTube video
- Cause: Patches/store items. Actions: Some templates and finishes come from the Podium Pass/Store. Availability changes over time.

Note: Don’t crank saturation to “max” to force visibility—this often clips in HDR and looks worse in motion.